AutoEZ: Collected Short Examples - Table of Contents
- Part 1
- 20m Delta Loop on 5 Bands?
- Multi-Band Vertical With Autotuner
- NVIS Performance vs Quality of Ground
- Response of Fixed-Component L Network
- Part 2
- Doublet with Ladder Line Feed
- 20m/15m Dipole
- Horizontal Loop for 160m through 10m
- 40m Dipole with 15m "Capacity Hats"
- Impedance and Length, 1/2 Wave vs 3/2 Wave
- Horizontal Loop, Source R vs Height
- Part 3
- Modeling for the N6LF "Elevated Radials" QEX article
- Trimming Elevated Radials
- Elevated Radials - Near Fld Above/Below Ground
- Part 4
- Modeling Fan Dipoles and OCF Dipoles
- Modeling Coupled-Resonator Multiband Antennas
- Modeling LPDAs
- Feedpoint R vs Height
- Designing Delta Matches
- Part 5
- Using the Optimizer for Yagi Design
- Coax Lengths for Feeding a Yagi Stack
- Coupled Yagis on Separate Towers
- Modeling an 80m Broadband Dipole
- Vertical Dipole, Pattern vs Base Height
- Part 6
- 40-30-20 Dipole Fed With Ladder Line
- Segment Lengths, AutoSeg, and Average Gain Test
- Two-Element Yagi with Equal Length Elements
- Dual-Band Vertical with "Autopilot" Matching Network
- Ground Mounted Vertical, Resonant Height vs Element Diameter
- Modeling 8-Circle Arrays
- Part 7
- Custom Functions CurMag() and CurPhase() - Terminated Folded Dipole
- Wire Insulation - Multiple Settings
- Smith Charts and SWR Charts for a G5RV / ZS6BKW
- Combined Ladder Line plus Coax Loss for a G5RV / ZS6BKW
- General Purpose Flat/Vee/Catenary Doublet with Ladder Line Feed
- Part 8
- Modeling "Bent Dipole" (and Conventional) 4-Squares, with Feed Systems
- Line Lengths and Scope Traces for Lahlum/Lewallen Networks
- Modeling Intersecting and Bus-Wired Radial Fields
- Alternative 3D Plots for EZNEC Pro/4 Users
- Part 9
- Spiderbeams with Variables
- The G3TXQ Cobweb
- 17/15m Coupled-Resonator Rotatable Dipoles
- Steerable V-Beam
- Self-Phasing Turnstiles
- Part 10
- SteppIR Yagis - Basic Setup
- Correlating to Measured SWR
- Modeling the EHU Balun
- Modifying the Patterns