MultiNEC 28.5 ft in SLT30 *** DO NOT MAKE MANUAL EDITS TO THIS FILE *** _1 "_ 1=ZS6BKW, 2=G5RV" "_ Use ""A"" to choose ZS6BKW or G5RV configuration" _1 "_ 1=With feedlines, 2=Without feedlines" "_ Use ""B"" to see loss in combined ladder line + coax" _93.5 _ Antenna length - if ZS6BKW _102 _ Antenna length - if G5RV _40 _ Antenna height _40 _ Ladder line length - if ZS6BKW _34.8 _ Ladder line length - if G5RV _75 _ Coax length - if ZS6BKW _80 _ Coax length - if G5RV _ZS6BKW vs G5RV _0 _0 _=H _0 "_=IF(A=1, E, G)" _=H _#12 _=ODD(WireLen / WL * 100) _V1 _1 _0 _I "_=IF(B=1, """", ""X"")" _1 _50 _1 _0 _I "_=IF(B=1, ""X"", """")" _If B=1 (with feedlines) the source is placed at V1. _If B=2 (without feedlines) the source is placed at Wire 1 / 50%. _V2 _1 _50 "_=IF(A=1, J, K)" "_=TLParms(L76, 400, 0.902, 0.249956, 0.044559, 0.0012, 100, ""Ro"", 86)" "_=TLParms(L76, 400, 0.902, 0.249956, 0.044559, 0.0012, 100, ""VF"", 86)" _N "_=TLParms(L76, 400, 0.902, 0.249956, 0.044559, 0.0012, 100, ""dB"", 86)" _=Freq "_=IF(B=1, """", ""X"")" _Wireman 551 Ladder Line _V1 _V2 "_=IF(A=1, M, N)" "_=TLParms(L77, 50, 0.66, 0.256179, 0.154587, 0.003135, 100, ""Ro"", 37)" "_=TLParms(L77, 50, 0.66, 0.256179, 0.154587, 0.003135, 100, ""VF"", 37)" _N "_=TLParms(L77, 50, 0.66, 0.256179, 0.154587, 0.003135, 100, ""dB"", 37)" _=Freq "_=IF(B=1, """", ""X"")" _Belden 8267 (RG-213/U) "_If B=2 (without feedlines) both transmission lines are ""marked out""." Controls FALSE TRUE 2 4 1 1 0 1 50 0 0 FALSE TRUE _1 _0 _Freq (MHz) _3.6 _7.1 _10.1 _14.1 _18.1 _21.1 _24.9 _28.5 9